I picked up a 24 foot stick of 2x3x3/16 for my frame yesterday. I’m adding 6 inches to the front of Youngsters frame dimensions as I plan to add 6 inches to my cowl.
I have a 3 inch front tube with a 2.5 drop perch mounted that I picked up from a guy who went a different direction. I’m running a spring over on a stock model axle, so I figured the 2.5 perch would help with lowering the front.
My question is, will I be ok with a 10 inch kick at 60 degrees for when it comes time to set my rear end? I plane to run an S10 rear with a posi convertion.
I have a 3 inch front tube with a 2.5 drop perch mounted that I picked up from a guy who went a different direction. I’m running a spring over on a stock model axle, so I figured the 2.5 perch would help with lowering the front.
My question is, will I be ok with a 10 inch kick at 60 degrees for when it comes time to set my rear end? I plane to run an S10 rear with a posi convertion.